Here´s my most recent hiking staff completed and close up. Top is a detail of the cubicle - nosed Mohawk pig that is intended to be a Celtic boar as a crown and handle-fitting. You can guide a length of paracord through the hole and make a loop that way to harvest apples and the like. The design makes the bristles also good for prying.
The tip is tempered spring steel and makes a good choice when digging for roots.
I also fitted a leaf forged from bearing bronze.
The stick is made from fire-hardened blackthorn. It will get a jasper inlay into the gnarled part.
I personally like it;-).
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Posts mit dem Label walking stick werden angezeigt. Alle Posts anzeigen
Posts mit dem Label walking stick werden angezeigt. Alle Posts anzeigen
Donnerstag, 30. Oktober 2014
Donnerstag, 9. Juni 2011
Working on my blackthorn Shillelagh
In my opinion, the blackthorn in itself has a lot to do with the Irish (and Scottish) and maybe Celtic psyche in general.It´s hard, enduring, yet shows a lovely blossom. The fruit are sour and bitter when not treated properly, but delicious if you know how to handle them ;-).
The Ogham meaning (Straif: begining of secrets, death, winter tree), and the modern Runic connotation, i.e. Thorn, thurisaz goes hand in hand with this fascination. I just wanted to make a Shillelagh, and to treat it with the respect it deserves. Not primarily as a weapon, but as a walking stick and as a mythological inspiration.
It has dried out nicely, but showing one crack along the knob. I filled it with some dual-compound glue. I left the bark on, and heated it with a hairdryer, applying a mixture of beeswax, resin, and boiled linseed oil. gave it a good burning with the hairdryer again. Then I polished it with some 1000 grit sanding paper and steel wool (0,000). I will forge a tempered tool steel tip for it and maybe make a bronze cap. I will carve some runes into it I have yet to find, and this Shillelagh´s name I have to find still, too.
Abonnieren
Posts (Atom)
Beliebte Posts
-
On the flea market in Schwelm, where I worked as a member of the organisation team, I found this treasure; a real tribal dagger, which I ...
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
So I am in a really fascinating process of recreating the Trollstein knife, a knife that had been found in the glacier melt near Trollstei...
-
In my relatively...ummmm...vast? . ;-) collection one can find among many others these two knives. For the one below I can safely state t...
-
This is a new knife project that is almost entirely courtesy of the woods and the deep earth; it is forged out of ancient spring steel wi...
-
On the Friday of the week before last week I made for Ahlhauser Hammer ironforge and decided to take the bus and walk the final miles. Th...
-
Joel suggested a concoction consisting of linseed oil and iron oxide to tan the sheaths. I had some iron oxide left from etching my damas...
-
Okay, here they come.. some progress shots of my Sica, now aptly named Úlenklawe. In my local vicinity there was a special language spoke...
-
This is a very special knife with a strong historical background. The blade is made from crucible steel I found in the woods and a middle...
-
Nick and Kathrin had called the other day if I´d wanted to come along visiting the nature art EN expo in the Hülsenbecker valley with t...