Yet another fun little carving project: Whittle a hobo clothespin

This is another beginner-friendly crafts project.  All you need is a Swiss Army knife again.  For wood, I choose hazel, because it is easy to carve when fresh and dries out to be tough and resilient, due to the long, dense grain.  You want to take a piece that is as straight as possible and with no twigs or branches.  At a right angle, drill a hole with the awl of the SAK.  Widen the hole with your little blade or by using the saw. 

I made a little Video about it on the YouTube channel: 

The hole acts as a stress relief hole. 

Using your little blade, carve a recession, Equalizer on both sides, towards the end of stick. Use the big blade to split the wood towards the relief hole. Do not forget to lock your elbows to your sides. Lightly work the blade into the end grain.  As soon as you feel the resistance of the wood go down, your stick is split.  

Now carve a tear-shaped hole towards the end of the stick. Be careful not to remove too much material from the end. 

With a scooping cut, remove the thickness at the middle of the clamp. What this does is reducing the spring resistance of the clamp. 

Add a V- or stop cut for decoration or for fixing the pin to the washing line with twine. Add another at the end to cut the clothespin from the branch. 

And just like that, you have a little helper that can also come in handy for re-closing packages. You can carve these as a beginner in just half an hour. 

 With more experience, however, you can carve one in less than ten minutes.  

For me, that is a quick and satisfying project, especially when you have little time.  

So, I hope that was halfway helpful.  Thanks for dropping by, and take good care! 

Another mythological knife-from junk

This is a knife I forged quite some time ago at a really lovely friend's place. It is exclusively made from material I found in the woods.  The blade is made from a three-layer laminate from a really old file and 150 year old leaf spring. The leaf spring had a carbon content of about 0.7 %. 

That file, though...

With the first blows from the hammer, it crumbled like old cake, so I had it checked. It has a carbon content of about 1,5% and a weird dendritic structure.  So, grinding away all the rust marks and structure, and gently tapping at a relatively low temperature with a really small temperature window it was. Used a wooden mallet for that. It took me two days to get it to move at all, and a break of three month to recover from the inflammation in my elbow to weld it in between the leaf spring sandwich construction. And at first it didn't want to weld. Drove me fecking mad.  But it eventually worked out, after I messed up the first piece. Forged some kind of animal head to the handle. 

The handle is wrapped with some rawhide of a rotting fox cadaver I took with permission and which was salted and smoked and wet-wrapped after soaking in a concoction of soda and denatured alcohol, then heat-treated with resin, beeswax, mastix, mistle berries, dragon's blood resin in denatured alcohol. 

  

The grind is a high convex bevel to almost zero. Almost flat, to be precise, and polished in the edge. The blade is really resilient, and selectively triple-tempered. The edge is really hard, I estimate it at some 62HRC, the middle is soft, the spine is also tempered to an estimated 52HRC. It throws sparks off a flint and a ferrocerium rod.  It is rather thin at 2.8 mm, but can be bent to almost 50 degrees. 

Length is some 102mm, the CoB is on the index finger. 

The fascinating thing is that I learned a lot in the process (and as I said, I failed first), and that it is a bit of a playing with undereutectoid and eutectoid steels. It does look like any old ren fair knife, but it is not.  

There actually was a huge learning curve involved. Also, the knife is a part of my own story. I intimately knew that fox relative, I found the steel in nocturnal woods under a sickle moon, and I bled and suffered for the knife. I made my sacrifices for it.  

It is the sharpest knife I ever made, and you guys know that I am my own worst critic normally.  I am almost a bit scared of it, even though one can always do better.  That is not my point.  It is not perfect, it is not better than my Casström.  Well, maybe it is far more slicey. 

But it is a myth in itself. A piece of magic, maybe.  

As a kid, I wanted to find the magic sword, as a lot of kids do. And as an adult, I asked the forest.  I have shown you some of its answers on the blog over the years. It has been a weird, but interesting journey, and about some of its answers I would not talk.  No offence meant, but most people simply could not understand.  

Thing is, the magic sword will no longer smite the dragon.  The symbol of the time is not a symbol of chivalry or heroism.  The symbols of our time are the tank, the whip, the Credit Card- and the extermination robot.  All introduced by the dragons of our world, cursing mankind every single day. 

The forests are dwindling. Wildfires rage. 

But deep below, from the mycelium, magic sprouts.  It lingers eternal. It is patient and alien. It sometimes looks really profane.  Like a harsh, hard truth, sometimes. 

But never forget: It is invincible, because it is infathomeable, because it is indomiteable.  

I will die sooner or later. I will rot.  But I am a part of the magic.  

I am indomiteable.  

Become magic.  

Another simple carving project: Carving a comfort bird

Recently I stumbled across a really great tutorial on YouTube, by The Maker Experience (Awesome guy, go check him out!) 

And of course I tried it out! It worked a cinch, although I did some of the steps in a different order.  

I made some in hazel and some in cherry, hoping to add a bit of my own flavour to the idea. 

Projects like this are really awesome.  You can accomplish them with a simple Swiss Army knife. 

Have a cuppa, sit in the woods, listen to the birds and whittle away.  

It doesn't need a lot of your time, just a half of an hour is enough for some nice results. 

 You can always do better, as you can see in the picture, and you will make some good progress relatively fast.  

And there is a punchline, of course.  Because, while not on a primary level, making pretty and good things is political. 

Why that, you ask? 

Woodcarving and greenwood work is scientifically proven to be beneficial for your mental health (https://www.churchilltrust.com.au/project/to-investigate-the-mental-health-benefits-of-green-woodworking-in-therapeutic-settings-for-veterans et al). It offers a sense of calm, of self-empowerment, and of achievement.  In a world that floods the zone with horror and bullshit in order to keep you in a state of learned helplessness in order to steal your sovereignity, your dignity and human rights from you, everything that enables your resilience is resistance.  Add to that the soothing effect of being in nature, and it can really help you heal. Try it, you won't regret it. It certainly helps me keep what little sanity I still have, and it never fails to soothe my soul.  

Maybe it can help you, too.  

Take good care, and thanks for dropping by, as always! 😊