These are three knives that have thoroughly earned their merits. I made two of them very long ago and one quite a long time ago. All three have seen some severe amount of abuse, prying, hacking, slicing, cutting, batoning, scraping off putty from windowpanes, cutting plasterboard, levering up doors, even splitting coconuts. All three came out begging for more. All three have something in common: A steel that any modern-day knifemaker would sneer at.
Spring steel. Crap. Junk. A carbon content of about 0,55-0,75%. No fancy Niobium or Unobtanium alloy. No Damascus, no Wootz.
I love the latter, and we will see that there are knives out of these varieties that also deserve a place, but what does not cease to astound me is how well this material copes with everything you can throw at it.
All three of them have taught me a lot about blade and especially edge geometry, balance and overall layout. Above is the first prototype of my Fimbulmuk design. While not that able a woodworker, it excels in skinning and food prep tasks or even snacking. The two below are just about my favourite bushcraft knives. Both of them I use for all the hard work in the woods and the smithy. The one in the middle is the most able carving knife and best suited for woodworking while not compromising other applications.
The last one is sort of a compromise between the two above. Following the lines of a traditional hunting knife, it provides good woodworking capabilities, albeit not as good as the one with the birch burr handle, but also excels in food prepping and other applications.
I asked myself, why this might be the case?
Now look at the edge lines. The Fimbulmuk´s is by intention quite offset. The last one has an offset, too, but the butt of the handle is more in line with the tip. The resulting balance axis therefore is more of a parallel line to the ground, while the Fimbulmuk´s is more sloped. Even more extreme is the one on the knife with the birchwood handle. By the way, for both the Fimbulmuk as well as the one in the middle (which, by the way was inspired by Ilkka Seikku´s excellent bush prowler knife: http://rautasarvi.blogspot.de/2014/01/bushprowler-by-ilkka-seikku-bushprowler.html), I used a whiplash line scheme for construction. This knife has a very even balance axis. Balance point on all of the three knives is on the index finger. Most dexterous is the one in the middle. This is due to a balance axis/edge line that is not offset and lies directly in line with the handle. There are advantages and disadvantages to this design, but for the most part, this is my favourite. Most of the work I do is woodworking anyway.
But all of these knives will remain faithful companions to my working life in the woods!
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Beliebte Posts
-
On request I am doing a personal evaluation of a very classic bushcraft combination. The famed Roselli hunter and carpenter´s knife. I pur...
-
I like to think that I am a thinking man. I like to think that I have a reasonable amount of common sense. I have a day job like so many ...
-
Made a fast herb chopper for the most extremely bestest magical sorcery troll. File steel, selective quench and triple temper.
-
Hyourougan are so - called "hunger pills" in use by the famed Shinobi of ancient Japan. They are actually a military ration for sc...
-
Well, this is a really old and treasured knife I have had since the 1990s, a Helle Fjellkniven in H3LS steel. I have used this really slic...
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
So I am in a really fascinating process of recreating the Trollstein knife, a knife that had been found in the glacier melt near Trollstei...
-
This is the common birch polypore, fomitopsis betulina, also known as birch bracket or razor strop. For a bushcrafter, it is a treasure ...
-
So, this is just the beginning of a series of posts about one of the best times I have ever had at the Solingen Knife Fair, which took pl...
-
The first steps towards my new Rus knife have been made, and I realized in the process that the Kopis knives I love so much actually have...