The noise outside was driving me mad, and I was in desperate need for some green, so I packed my gear and my supper and made for a place in the woods behind my "home" sheltered from the noise of the highway, the plane traffic, the road and the railway station, the yelping, shrieking, yelling and crying of Ritalin-drugged kids and drunks waiting for the bus. Funny, how calm this wood actually is, even if the highway runs through it. I took a deep breath, poured myself a cuppa and took my snack board and one of my favourite knives. Had some leftover steak from BBQing and some real bread, and just relished in great food and tea and silence.
In case you ask, the blade is 90 mm x 3mm of my own San- Mai damascus (60 layers of 1.2842 toolsteel and rebar with a cutting core of 1.2842, brass fittings, tang peened over amd a chunky, comfy stag antler handle. It´s one of my favourite snack and kitchen and carving knives. I had a sheath for it, which I had bought, but it did not fit too well, so I finally got to business the other day and made a sheath for it, nothing fancy, really, but tanned and tempered with dragon´s blood (daemonoropos draco) concoction, wet-formed and then hot-dragonblooded and beeswaxed;-).
On my way home I got myself some spruce sprouts for schnapps,tea and syrup. I like to use it as a concoction against the flu and the like, the schnapps is also good for the digestion;-). To make the syrup you need:
3 handful of spruce sprouts
1 cup wood honey
1 natural lemon
sugar if you are so inclined, or more honey
Put one layer of spruce sprouts in a jar. Thoroughly wash the lemon. Make thin lemon slices and put them atop the spruce sprouts. Cover with honey. Add another layer of spruce, and lemon slices, cover with honey, and so forth. Add a thick layer of sugar to keep off the air. Put on the lid. Let it rest for a week in the sun. Pass through a sieve. Carefully heat the syrup to at least 75° Celcius and pour it in a vaccum lid, put the lid on and set it upside down for aan hour. Heat in a bain-marie again. Done;-).
Schnapps:
1 handful of spruce sprouts
1 cup wood honey
1 l Vodka
Cover the sprouts with honey, let it rest for a week. Cover with Vodka, let it rest for 6 weeks. Pass through a sieve. Nasdarowje!;-)
For tea, take 5-10 spruce sprouts, pour with 0,3 l of boiling water. Sweeten with honey if you feel so inclined. It´s also delicious with a twig of sage and hederacea glechoma.
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Beliebte Posts
-
On request I am doing a personal evaluation of a very classic bushcraft combination. The famed Roselli hunter and carpenter´s knife. I pur...
-
I like to think that I am a thinking man. I like to think that I have a reasonable amount of common sense. I have a day job like so many ...
-
Made a fast herb chopper for the most extremely bestest magical sorcery troll. File steel, selective quench and triple temper.
-
Hyourougan are so - called "hunger pills" in use by the famed Shinobi of ancient Japan. They are actually a military ration for sc...
-
Well, this is a really old and treasured knife I have had since the 1990s, a Helle Fjellkniven in H3LS steel. I have used this really slic...
-
So, this is just the beginning of a series of posts about one of the best times I have ever had at the Solingen Knife Fair, which took pl...
-
This is the common birch polypore, fomitopsis betulina, also known as birch bracket or razor strop. For a bushcrafter, it is a treasure ...
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
Made a simple sheath for the new Trollstein knife trial piece. Just quick and dirty is all, but I already found out something. These are t...
-
That´s how it looks now, blade coarsely ground, copper ferrule fitted, handle tanned and glued in place, tang riveted inside. Have to fill t...