Those are two knives I have got in the making. Topmost is a spring steel dragon head utility knife, a rugged bastard of a user with less than 1 % stock removal.
Below is a puuko with a yew handle and a prototype blade for either Puronvarsi or Iisaakki Järvenpää, which the master, Rudolf Broch, himself forged from 1.4110 steel. The blade had Rockwell markings from tip to tang, and it has a defined hardness from 55 HRC in the first cm of the tang, 57 in the middle and 58 near the tank, which suits me fine to know! As for the handle... I am not quite sure if I´ll ever make one yew handle again. It´s as if the Gods would require at least two handles as a sacrifice*ggg*. I go through at least two handles, and even this one had a crack near the butt. So I filed the questionable part off and fitted a copper buttcap to keep the mess together. It will work fine, but looks ugly. I´ll take this as another user, but it´s a bit unnerving. But, as always, I´ll work on it, and I keep learning still.
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Beliebte Posts
-
On request I am doing a personal evaluation of a very classic bushcraft combination. The famed Roselli hunter and carpenter´s knife. I pur...
-
(Photo courtesy of Secrets Of The Ice, Norway) This is an awesome story. Says I. Because it was once upon a time, in the sixth century, ...
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
You all have read my post about the Knifemaker´s Fair in Solingen Klingenmuseum which...
-
Once upon a time, when steel was not abundant, there was an unknown smith working for the predecessor of the Funcke corporation, which later...
-
Originally this should have been a Chrismas present, but I messed up, so I gave it to her this weekend. A short (85mm x 3mm ca.) damas...
-
Since there´s no smithing to date, I have time to do other projects. This is a dangler clip sheath. Wet formed, hot waxed with a mixtu...
-
Hobbit Day 2017 was a HUGE success. It is only natural that the chairmen of the club decided to cancel the layout for 2018, making ...
-
Roland had a fit of creativity;-) and set up a new site for our founding club. Visit: www.ahlhauser-hammer.de to get the static data ...
-
This is a project that has taken quite some time and energy to make-and was great fun to accomplish. It is a kind of talisman to me, for ...