When at Erich´s place, we had some sort of an experiment... felting a vest, that is. We took Coburgian fox sheepswool. First came a layer of newspaper, then some air foil.
Then we started to lay out the wool in one direction.
The wool laid out.
Pouring warm water over it.
Do not overdo it!
The prefelting with soap and warm water.
The backside prefelted.
Felting the front, right side.
Adding more soap water.
We felted with small rotating movements of our hands.
like this, see;-)?
We made the soap water with a piece of soap.
The right and the backside ready to be felted together. Please note the unfelted wool at the sides to be connected with the main body.
The next part.
Done...;-).
Then we put the air foil on the inside and connected the parts by felting the sides to the main body.
...
...more detail work.
The magic troll, as usual, did the flimsy work... ;-)
More felting...
...
Gently applying more soap water...
Then it was some arduous work, doing the actual felting. We wrapped the whole thing in air foil and rolled and punched it to and fro.
The finished product, ready for a turn in the laundry, at 60 degrees Celsius.
Rinsing away the remaining soap...
..and the bulletproof ballistic bastard of a vest after a turn in the laundry... didn´t quite turn out the way we wanted;-)... but it was a valuable learning process!
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Beliebte Posts
-
On request I am doing a personal evaluation of a very classic bushcraft combination. The famed Roselli hunter and carpenter´s knife. I pur...
-
(Photo courtesy of Secrets Of The Ice, Norway) This is an awesome story. Says I. Because it was once upon a time, in the sixth century, ...
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
You all have read my post about the Knifemaker´s Fair in Solingen Klingenmuseum which...
-
Once upon a time, when steel was not abundant, there was an unknown smith working for the predecessor of the Funcke corporation, which later...
-
Originally this should have been a Chrismas present, but I messed up, so I gave it to her this weekend. A short (85mm x 3mm ca.) damas...
-
Since there´s no smithing to date, I have time to do other projects. This is a dangler clip sheath. Wet formed, hot waxed with a mixtu...
-
Hobbit Day 2017 was a HUGE success. It is only natural that the chairmen of the club decided to cancel the layout for 2018, making ...
-
Roland had a fit of creativity;-) and set up a new site for our founding club. Visit: www.ahlhauser-hammer.de to get the static data ...
-
This is a project that has taken quite some time and energy to make-and was great fun to accomplish. It is a kind of talisman to me, for ...